為了讓 HPE iLO 可以吃到 Proxmox 上面的狀態所以我需要安裝 AMS 在 Proxmox 上面。
安裝 HPE AMS
要安裝 HPE AMS 需要先加入 APT Repository，因為我手上的機器是 ProLiant DL360p Gen8，最新版的 Proxmox 用的 bullseye 並沒有辦法安裝 hp-ams 所以我只能使用 stretch/10.80 版本
加入 APT Repository
加入方法可以直接使用以下的指令就可以安裝好 APT Repository
我手上的機器是 HP Gen8 需要使用以下的位置
$ echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp stretch/10.80 non-free" > /etc/apt/sources.list.d/hpe.list $ curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048.pub | apt-key add - $ curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048_key1.pub | apt-key add - $ curl https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -
如果是 Gen 10 修改成以下
$ echo "deb http://downloads.linux.hpe.com/SDR/repo/mcp bullseye/current non-free" > /etc/apt/sources.list.d/hpe.list $ curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048.pub | apt-key add - $ curl https://downloads.linux.hpe.com/SDR/hpPublicKey2048_key1.pub | apt-key add - $ curl https://downloads.linux.hpe.com/SDR/hpePublicKey2048_key1.pub | apt-key add -
安裝 hp-ams
APT Repository 處理好後就可以直接使用 apt install 安裝 AMS 了，而其中還有幾個可以安裝的可以參考如下：
| hp-health | HPE System Health Application and Command line Utilities (Gen9 and earlier) |
| hponcfg | HPE RILOE II/iLO online configuration utility |
| amsd | HPE Agentless Management Service (Gen10 only) |
| hp-ams | HPE Agentless Management Service (Gen9 and earlier) |
| hp-snmp-agents | Insight Management SNMP Agents for HPE ProLiant Systems (Gen9 and earlier) |
| hpsmh | HPE System Management Homepage (Gen9 and earlier) |
| hp-smh-templates | HPE System Management Homepage Templates (Gen9 and earlier) |
| ssacli | HPE Command Line Smart Storage Administration Utility |
| ssaducli | HPE Command Line Smart Storage Administration Diagnostics |
| ssa | HPE Array Smart Storage Administration Service |
| storcli | MegaRAID command line interface |
$ apt update $ apt install hp-ams $ apt install ssacli ssaducli ssa
如果是 Gen10 直接使用 amsd
$ apt update $ apt install amsd